Magma EB7-X8G2 User Manual page 25

Magma
To check the details of the Magma Upstream Port on Bus 1, Device 0, Function 0 (01:00.0), type "lspci –s 01:00.0 –vvv"
command on the terminal window. The Bus number will change depending on the Server and location of host card.
Below is the output of "lspci –s 01:00.0 –vvv", there are several important information you need to check and these are
the Link speed, port#, slot# and Bandwidth. There are commands to use to extract this information, go to "Linux
Commands....."
EB7-X8G2 | Chapter 3 Software Installation 25