Magma EB7-X8G2 User Manual page 44

Remove the card and replace it with a new one. Then press the button again.
IMPORTANT
Ideally the PCIe card that was removed from the system will be replaced with
an identical, working card. Replacing that card with one that has a different
function or purpose may cause the system to crash due to a mismatch in the
resources pre-allocated by the operating system.
1. The LED should start flashing again.
If power should not be applied to this slot, immediately press the button again and the LED will stop flashing and
remain off, otherwise go to step 10.
2. After 5-6 seconds the LED will stop flashing and remain on.
After a brief period the new device will be recognized by the system, and it should be added back to the list in the
"Safely Remove Hardware" dialog.
EB7-X8G2 | Chapter 4 Install PCIe Cards
Magma
44