Magma
How to Disconnect iPass Cable
Pull the green tab while slowly pulling out the cable from the Interface card. Failure to pull the green tab while
disconnecting the iPass cable can break the connector inside the Interface card,
Connect Power Cord / Cable
Connect power cord to electrical outlet. Magma only provides the 110-120V power cord.
It is highly recommend using a power surge. This product is provided with a power supply that automatically adjusts to
input voltages between 100 to 240 Vac. A U.S. and Canadian 125 V power supply cord is provided with this product. If
using this product outside of the U.S. or Canada, please use locally available power supply cords.
Connect the AC power cord to the of back of the unit. Ensure that the system's power supply unit is switched OFF
before connecting the power cord.
EB7-X8G2 | Chapter 2
Hardware Installation
15