Accessing The Various Snmp Functions - Magma EB7-X8G2 User Manual

Magma

Accessing the various SNMP functions

Once the MIB file has been loaded to an SNMP server (via a front-end software typically called a MIB Browser) we can
read in status information and set up specific functions otherwise not available via the Web interface.
The MIB Browser (or equivalent front-end SNMP software) will display the Magma chassis MIB contents in an explorer-like,
Tree interface. A snapshot from the MIB Browser by iReasoning is shown below:
Under the MIB Tree, the Magma Chassis will have status information that can be read by expanding the respective
folders. This information is also available in the Web interface mentioned previously. In addition, if we
expand the sendAction folder (as shown above) we gain access to "writable" functions that essentially allow us to
remote-control the chassis.
Remote Chassis Reset (turnPowerOffOn)
This function allows us to remotely turn the chassis off and on.
Right-click on it, and an options menu will appear. Select the "Set "command:
EB7-X8G2 | Chapter 4 Install PCIe Cards 40