Install Expansion Interface Card (Eif) - Magma EB7-X8G2 User Manual

Magma
Check inside the unit, see if the Expansion interface card is installed. If the Expansion interface card is not plugged in,
go to the next step "Install Expansion Interface card". The pictures below are showing an EB7-X8G2 with Expansion
Interface card installed.
No Expansion Interface card installed in the UPSTREAM SLOT as shown from the pictures below.

Install Expansion interface card (EIF)

" By default an EIF card should already be installed in the Magma expansion chassis.
Prior to installing the card, make sure the Dipswitch SW1 is set to ON position (ON=EXP) and Dipswitch SW2 is set to OFF
position (x8 setting), see pictures below. The expansion system will NOT function if SW1 is set to OFF=HOST.
EB7-X8G2 | Chapter 2 Hardware Installation 10