Table of Contents
Advertisement
Power on the System for the First Time
For more information about the administration tasks such as changing passwords, adding
accounts, and setting account privileges, refer to the Oracle ILOM documentation.
Note -
to assign a static IP address to the SP, see
Port" on page 77
3.
Power on the server using one of the following methods.
Press the System Power button.
■
At the Oracle ILOM prompt, type:
■
-> start /System
Are you sure you want to start /System (y/n)? y
The server initialization might take several minutes to complete.
To cancel the initialization, press the #. (Hash+Dot) keys to return to the Oracle ILOM prompt.
Then type: stop /System
(Optional) Redirect the host output to display on the serial terminal device.
4.
-> start /HOST/console
Are you sure you want to start /SP/console (y/n)? y
Serial console started.
. . .
5.
(Optional) Execute other Oracle ILOM commands while the server initializes.
a.
To display the Oracle ILOM prompt, press the #. (Hash+Dot) keys.
b.
To see information about available Oracle ILOM commands, type:
To see information about a specific command, type help command-name
c.
To return to displaying host output from the server initialization, type:
-> start /HOST/console
6.
Continue with the installation by installing the OS.
See
"Installing the OS" on page
70
SPARC T7-1 Server Installation Guide • October 2015
By default, the SP is configured to use DHCP to obtain an IP address. If you plan
for more instructions.
"Assign a Static IP Address to the NET MGT
71.
help
Advertisement
Table of Contents
