Tools Needed for Installation
Caution -
techniciens. To protect electronic components from electrostatic damage, place components
on an antistatic surface, such as an antistatic discharge mat, an antistatic bag, or a disposable
antistatic mat. Wear an antistatic grounding strap connected to a metal surface on the chassis
when you work on server components.
Related Information
"Handling Precautions" on page 23
■
Tools Needed for Installation
No. 2 Phillips screwdriver
■
ESD mat and grounding strap
■
In addition, you must provide a system console device, such as one of the following:
ASCII terminal
■
Workstation
■
Terminal server
■
Patch panel connected to a terminal server
■
Related Information
"Handling Precautions" on page 23
■
"ESD Precautions" on page 23
■
SPARC T7-1 Server Service Manual
■
24
SPARC T7-1 Server Installation Guide • October 2015
Electrostatic discharge can permanently disable the server or require repair by service