Oracle Solaris Os Configuration Parameters - Oracle SPARC T7-1 Installation Manual

Oracle Solaris OS Configuration Parameters

Oracle Solaris OS Configuration Parameters
When configuring the Oracle Solaris OS, you are prompted for the following configuration
parameters. For more information about these settings, refer to the Oracle Solaris
documentation.
Parameter
Language
Locale
Terminal Type
Network?
Multiple Network Interfaces
DHCP?
Host Name
IP Address
Subnet?
Subnet Netmask
IPv6?
Security Policy
Confirm
Name Service
NFSv4 Domain Name
Time Zone (Continent)
Time Zone (Country or Region)
Time Zone
Date and Time
root Password
Related Information
Oracle Solaris OS documentation
■
"Configure the Preinstalled OS" on page 71
■
76 SPARC T7-1 Server Installation Guide • October 2015
Description
Select a number from the displayed language list.
Select a number from the displayed locale list.
Select a terminal type that corresponds with your terminal device.
Select Yes.
Select the network interfaces that you plan to configure. If you are not sure, select the first one in the
list.
Select Yes or No according to your network environment.
Type the host name for the server.
Type the IP address for this Ethernet interface.
Select Yes or No according to your network environment.
If your answer to Subnet? was Yes, type the netmask for the subnet for your network environment.
Specify whether or not to use IPv6. If you are not sure, select No to configure the Ethernet interface
for IPv4.
Select either standard UNIX security (No) or Kerberos Security (Yes). If you are not sure, select No.
Review the onscreen information and change it if needed. Otherwise, continue.
Select the name service according to your network environment.
If you select a name service other than None, you will be prompted for additional name service
configuration information.
Select the type of domain name configuration according to your environment. If you are not sure,
select Use the NFSv4 domain derived by the system.
Select your continent.
Select your country or region.
Select the time zone.
Accept the default date and time, or change the values.
Type the root password twice. This password is for the superuser account for the Oracle Solaris OS
on this server. This password is not the SP password.