Table of Contents
Advertisement
After the system console finishes its low-level system diagnostics, the SP initializes and runs a
suite of higher level diagnostics. When you access the SP using a device connected to the SER
MGT port, you see the output of the Oracle ILOM diagnostics.
By default, the SP configures the NET MGT port automatically, retrieving network
configuration settings using DHCP and allowing connections using SSH.
For a more detailed discussion on configuring the system console and connecting terminals,
refer to the administration guide for your server.
Related Information
SPARC T7 Series Servers Administration Guide
■
Oracle ILOM documentation
■
"Configure the Preinstalled OS" on page 71
■
"Reach a State to Install a Fresh OS (Oracle ILOM CLI)" on page 72
■
"Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)" on page 74
■
"Assign a Static IP Address to the NET MGT Port" on page 77
■
Power on the System for the First Time
1.
Connect a terminal device to the server's SER MGT port.
See
"Connect a Terminal or Emulator to the SER MGT Port" on page
2.
At the terminal device, log in to the SP.
login: root
Password: changeme
. . .
->
After a brief delay, the Oracle ILOM prompt is displayed (->).
The server is provided with a default Administrator account (root) and a default
Note -
password (changeme) to enable first-time login and access to Oracle ILOM. To build a secure
environment, you must change the default password of the default Administrator account as
soon as possible after your initial login to Oracle ILOM. If you find this default Administrator
account has already been changed, contact your system administrator to obtain an Oracle ILOM
user account with Administrator privileges.
Power on the System for the First Time
67.
Powering On the Server for the First Time
69
Advertisement
Table of Contents
