Install The Rackmount Hardware - Oracle SPARC T7-1 Installation Manual

Related Information
Rack documentation
■
SPARC T7-1 Server Safety and Compliance Guide
■
"Rack Compatibility" on page 26
■
"Rack Cautions" on page 27
■

Install the Rackmount Hardware

Complete the following task to remove the mounting brackets from the slide rail assemblies
before installation.
Unpack the slide rails.
1.
The rackmount kit contains two slide rails, two mounting brackets, and optional securing
screws.
Refer to the rackmount kit installation card for simplified instructions about installing
Note -
your server into a 4-post rack, using the slide rail and CMA options.
No.
1
2
3
Description
Slide rails
Mounting brackets
Four M4 x 5 fine-pitch mounting bracket securing screws (not used)
Install the Rackmount Hardware
Installing the Server 29