Table of Contents
Advertisement
Item
Related Information
"Physical Specifications" on page 15
■
"Handling Precautions" on page 23
■
"Rack Cautions" on page 27
■
Rack Cautions
Caution -
the rack does not become top-heavy and tip over. Deploy the rack's antitilt bar to prevent the
rack from tipping during equipment installation.
Caution -
multi-unit rack assembly, the operating ambient temperature of the rack environment might be
greater than room ambient temperature. Therefore, install the equipment only in an environment
compatible with the maximum ambient temperature (Tma) specified for the server.
Caution -
adequate for the safe operation of the equipment.
Caution -
distributed evenly. A hazardous condition can exist with uneven mechanical loading.
Caution -
the server to the supply circuit, review the equipment nameplate power ratings and consider the
effect that circuit overloading might have on overcurrent protection and supply wiring.
Caution -
particular attention to supply connections other than direct connections to the branch circuit (for
example, use of power strips).
Caution -
Equipment Loading. Always load equipment into a rack from the bottom up so that
Elevated Operating Ambient Temperature. If the server is installed in a closed or
Reduced Air Flow. Install the equipment in a rack so that the amount of air flow is
Mechanical Loading. Mount the equipment in the rack so that the weight is
Circuit Overloading. Do not overload the power supply circuits. Before connecting
Reliable Grounding. Maintain reliable grounding of rackmounted equipment. Give
Do not use slide rail mounted equipment as a shelf or a work space.
Requirement
Height: 3.45 in. (87.6 mm).
Rack Cautions
Installing the Server
27
Advertisement
Table of Contents
