Supported Transceivers; Recommended Safety Practices; Safety Recommendations - Cisco UCS E Series Hardware Installation Manual

Supported Transceivers

Table 13: Supported Cisco EtherSwitch EHWIC and Cisco EtherSwitch Service Modules
Cisco EtherSwitch EHWIC
• EHWIC-D-8ESG-P=
• EHWIC-D-8ESG-P
• EHWIC-D-8ESG=
• EHWIC-D-8ESG
• EHWIC-4ESG-P=
• EHWIC-4ESG-P
• EHWIC-4ESG=
• EHWIC-4ESG
Supported Transceivers
Table 14: SFP Transceivers Supported on the E100-PCIE10GEFCOE
SFP
SFP-H10GB-CU1M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
SFP-H10GB-ACU7M
SFP-H10GB-ACU10M
JDSU (PLRXPL-SC-S43-22-N) SFP+
SFP-10G-SR

Recommended Safety Practices

This section describes recommended practices for safe and effective installation of the hardware, and includes
the following topics:

Safety Recommendations

To prevent hazardous conditions, follow these safety recommendations while working with this equipment:
• Keep tools away from walk areas where you or others could fall over them.
• Do not wear loose clothing around the router. Fasten your tie or scarf and roll up your sleeves to prevent
• Wear safety glasses when working under any conditions that might be hazardous to your eyes.
Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide
12
Cisco EtherSwitch Service Module
• SM-ES2-16-P
• SM-ES3-16-P
• SM-ES3G-16-P
• SM-ES2-24
• SM-ES2-24-P
• SM-ES3-24-P
• SM-ES3G-24-P
• SM-D-ES2-48
• SM-D-ES3-48-P
• SM-D-ES3G-48-P
• SM-X-ES3-16-P
• SM-X-ES3-24-P
• SM-X-ES3D-48-P
clothing from being caught in the chassis.
Description
SFP+ 10GBASE-CU 1-meter cable, passive
SFP+ 10GBASE-CU 3-meter cable, passive
SFP+ 10GBASE-CU 5-meter cable, passive
SFP+ 10GBASE-CU 7-meter cable, active
SFP+ 10GBASE-CU 10-meter cable, active
SFP+ (Optical)
SFP+ 10GBase-SR (Optical)