Lockout System Function - Thermo Scientific RC 6 Plus Operation Instructions Manual

OPERATION
Lockout system function (optional)
Lockout system
function
(optional)
4-28 RC-6 PLUS
Table 4-12.
Features on Menu Screen
The lockout system function is specifically designed for the RC-6 PLUS
centrifuge. This lockout system is used to limit the users of the centrifuge. The
registered users can use this system after the system administrators have
registered the users.
It is necessary for the system administrators to read the separated manual
"RC-6 PLUS LOCKOUT SYSTEM INSTRUCTION MANUAL". The users are
required to log on to the centrifuge by inputting the ID code and the password
on the initial screen of the lock out system to operate the centrifuge. After using
the centrifuge, be sure to log off the lock out system or turn off the main power
switch. This section describes the procedure for the lock out system operation.
Precool
The temperature in the chamber is
controlled at about 15 degrees
centigrade if the door is closed and
Precool is selected.
(The temperature in the chamber
may not hold at 15 degrees
centigrade if the
temperature or the temperature of
the
evaporator is 15 degrees centigrade
or less.)
Melody
You can select a desired melody
from one tune, a beep, or beep off
(silence) with the numeric key. Press
the ENTER key after selection.
Alarm Information
Alarm information and remedies are
displayed on the
INFORMATION screen.
This feature allows you to cope with
troubles that occurred
operation. Refer to Troubleshooting
for details.
Thermo Fisher Scientific
ambient
ALARM
during