Thermo Scientific RC 6 Plus Operation Instructions Manual page 38

OPERATION
Normal Operating Procedure
FUNCTION Field
Programmed Operation
4-10 RC-6 PLUS
Figure 4-4.
Acceleration and Deceleration Rates
Figure 4-5.
Function Field
The RC-6 Plus Superspeed centrifuge has many add-on features such as
programmed operation and centrifugal force values displaying and setting.
These features are displayed and selected on the FUNCTION field.
PROG : You can save run conditions in memory for later use in repeated
operation.
This feature also allows step-mode operation (three normal operations can be
combined in a sequence of operations).
RCF : The centrifuge automatically computes and displays RCF values from set
speed, or speed from set RCF values.
ω 2
T : The centrifuge automatically computes and displays run time from set
speed and ω 2
T set value.
Programmed operation capability is an add-on feature that saves set run
conditions in memory for later use. This feature allows you to save frequently
used run conditions in memory and then recall the saved run conditions
whenever you need them, thus making the operation procedure simple. (Even
when the POWER switch is turned off, the saved run conditions remain in
memory.) The memory in the centrifuge can contain 30 sets of run parameters.
Thermo Fisher Scientific