Thermo Scientific RC 6 Plus Operation Instructions Manual page 37

Acceleration Rate and
Deceleration Rate
Thermo Fisher Scientific
Figure 4-3.
RUN Mode Indicator
The acceleration and deceleration rates can be adjusted for a wide range of
use. The figure below shows how a rotor accelerates and decelerates in
compliance with a code number selected from 1 through 9.
Table 4-5.
Acceleration Rate and Deceleration Rate
Code No. Time for acceleration from
0 to 500 rpm
*
9 Minimum
8 30 sec.
7 45 sec.
6 1 min.
5 2 min.
4 3 min.
3 4 min.
2 6 min.
1 10 min.
0 -
*
The minimum time is the one that occurs when the rotor is being accelerated
or decelerated with the maximum torque of the driving motor. This time varies
with the type of rotor in use.
**
The minimum time is the one that occurs when the rotor is being accelerated
or decelerated with the maximum torque of the driving motor. This time varies
with the type of rotor in use.
Note
These time values vary with the type of rotor in use.
OPERATION
Normal Operating Procedure
Time for deceleration from
500 to 0 rpm
**
Minimum
1 min.
2 min.
3 min.
4 min.
6 min.
8 min.
10 min.
15 min.
Coasting deceleration from set
speed
RC-6 PLUS 4-9