Power Switch - Thermo Scientific RC 6 Plus Operation Instructions Manual

Table 3-2.

POWER Switch

Thermo Fisher Scientific
No Name
10 Cursor keys
(1) Makes the RUN SCREEN ready-to-enter state.
(2) Moves the cursor on the screen.
11 Ten-key Used to set run conditions with numeric values.
numerical
pad
The POWER switch is located in the upper right-hand corner of the front cabinet
panel. The switch is an ON/OFF toggle switch, when set to ON applies electric
power to the centrifuge.
CAUTION
Always keep the liquid crystal panel in a visible position while the POWER
switch is turned on so that you can check the current operating state.
" I " : ON
" O " :OFF
CONTROLS, DISPLAYS & INDICATORS
Key Function (refer to Figure 3-3)
1. Moves the cursor upward (
2. Moves the cursor left ( ).
3. Moves the cursor right ( ).
4. Moves the cursor downward ( ).
At time setting : switches between hours and
minutes.
At temperature setting : Used to enter a minus
sign.
At ω
2
T value setting : switches between integer
and mantissa.
At run time setting: used to set continuous
operation.
Used to clear typing errors and alarm messages.
(1) By pressing the CE key, the entered value on the
line where the cursor stays is cleared and the
cursor returns to the previous position.
(2) By pressing the CE key, displayed alarm
message is cleared. If two or more alarm
messages are displayed at a time, clear them
one by one. (Refer to Corrective Actions for
details.)
Used to fix the entered value.
POWER Switch
).
RC-6 PLUS 3-5