OPERATION
Saving and Changing Run Conditions
4-12
RC-6 PLUS
Table 4-6.
Change Run Conditions in Memory
Step
Key operation
4
When other
conditions are
saved, selecr the
desired memory
No. (.g.: at
MEMORY NO.2)
And enter run
conditions as
follows.
e.g.: SPEED:
20,000 rpm
TIME: HOLD
TEMP: 4 degrees
centigrade
ACCEL: 9
DECEL: 7
ROTOR No.: 25
(F20/MICRO)
Screen display and notices
The run conditions are saved at MEMORY No. 2.
* The screen turns to RCF and g.sec values entry
screen by pressing the cursor key.
Thermo Fisher Scientific