Saving And Changing Run Condition - Thermo Scientific RC 6 Plus Operation Instructions Manual

Saving and
Changing Run
Conditions
Thermo Fisher Scientific
To save or change run conditions in memory, use the following procedure.
Table 4-6.
Change Run Conditions in Memory
Step Key operation
1 Move the cursor to
PROG and press
the ENTER key.
2 Press the cursor
key to move the
cursor to SAVE
and press the
ENTER key.
3 Enter the desired
MEMORY No. to
be saved with the
ten-key numerical
pad and press the
ENTER key.
(e.g.: saving run
conditions
MEMORY No.1)
Saving and Changing Run Conditions
Screen display and notices
The FUNCTION field turns to the PROGRAM
field.
The screen turns to the MEMORY No. LIST
screen.
A setting parameter of the RUN SCREEN is
temporary saved at first memory area.
The cursor moves to the desired MEMORY No.
at
OPERATION
RC-6 PLUS 4-11