Thermo Scientific RC 6 Plus Operation Instructions Manual page 41

Using Programmed Operation
Thermo Fisher Scientific
Table 4-6.
Change Run Conditions in Memory
Step Key operation
5 After saving run
conditions, press
the ESC key twice.
Note
1. When the saved run conditions are changed, the previous run
conditions are cleared and the newly saved run conditions are in effect.
2. Run conditions cannot be saved while the rotor is rotating. Check that
the rotor stops completely before saving run conditions.
To recall the saved run conditions and use programmed operation with the
recalled run conditions, take the following procedure.
Saving and Changing Run Conditions
Screen display and notices
*The PROGRAM field appears by the first press
of the ESC key.
*The FUNCTION field appears by the second
press of the ESC key.
OPERATION
RC-6 PLUS 4-13