Thermo Scientific RC 6 Plus Operation Instructions Manual page 26

CONTROLS, DISPLAYS & INDICATORS
Operation Panel
Table 3-1.
No Name
2 FUNCTION
field
3 Message
indicator
4 RUN mode
indicator
Table 3-2.
3-4 RC-6 PLUS
Display Panel Function (refer to Figure 3-1)
• PROG Used to save run conditions for
programmed operation.
• RCF Used to display and set RCF value.
ω 2
• T Used to display and set for integrator
operation.
Displays alarm message, prompt and rotor model.
Displays operating mode with illustration of a rotor.
Operating modes are as follows:
STOP, ACCEL, RUN (Displayed when rotor is
rotating at set speed), DECEL
And DELAY (Displayed up to RTC operation is
started)
Figure 3-3.
No Name
5 START key
6 STOP key
7 ROTOR
key
8 ESC key
9 MENU key
Function Keys
Key Function (refer to Figure 3-3)
Starts the centrifuge run.
Stops the centrifuge run.
Used to display rotor list or to enter desired rotor
number.
Used to return to the previous screen. (e.g., from
MENU screen to RUN SCREEN)
Displays MENU screen.
You can select user customization, or alarm
information.
Thermo Fisher Scientific