Table of Contents
Advertisement
S3C80A5B
STOP
— Stop Operation
STOP
Operation:
The STOP instruction stops the both the CPU clock and system clock and causes the
microcontroller to enter Stop mode. During Stop mode, the contents of on-chip CPU registers,
peripheral registers, and I/O port control and data registers are retained. Stop mode can be released
by an external reset operation or by external interrupts. For the reset operation, the RESET pin
must be held to Low level until the required oscillation stabilization interval has elapsed.
Flags:
No flags are affected.
Format:
opc
Example:
The statement
STOP
halts all microcontroller operations.
Bytes
Cycles
Opcode
1
4
INSTRUCTION SET
Addr Mode
(Hex)
dst
src
7F
–
–
6-81
Advertisement
Table of Contents
