6.2 STATUS
PATH: ACTUAL VALUES
REMOTE DPS INPUTS
The present state of the remote double-point status inputs is shown here. The actual values indicate if the remote double-
point status inputs are in the on (close), off (open), intermediate, or bad state.
PATH: ACTUAL VALUES
CONTACT OUTPUTS
The present state of the contact outputs is shown here. The first line of a message display indicates the ID of the contact
6
output. For example, 'Cont Op 1' refers to the contact output in terms of the default name-array index. The second line of
the display indicates the logic state of the contact output.
For form-A contact outputs, the state of the voltage and current detectors is displayed as Off, VOff, IOff, On, IOn,
and VOn. For form-C contact outputs, the state is displayed as Off or On.
NOTE
PATH: ACTUAL VALUES
VIRTUAL OUTPUTS
The present state of up to 96 virtual outputs is shown here. The first line of a message display indicates the ID of the virtual
output. For example, 'Virt Op 1' refers to the virtual output in terms of the default name-array index. The second line of the
display indicates the logic state of the virtual output, as calculated by the FlexLogic equation for that output.
6-4
STATUS
REMOTE DPS INPUTS
REMOTE DPS INPUT
STATUS: Bad
REMOTE DPS INPUT
MESSAGE
STATUS: Bad
REMOTE DPS INPUT
MESSAGE
STATUS: Bad
STATUS
CONTACT OUTPUTS
Cont Op 1
Off
Cont Op 2
MESSAGE
Off
Cont Op xx
MESSAGE
Off
STATUS
VIRTUAL OUTPUTS
Virt Op
Off
Virt Op
MESSAGE
Off
Virt Op 96
MESSAGE
Off
C70 Capacitor Bank Protection and Control System
6.2.4 REMOTE DOUBLE-POINT STATUS INPUTS
Range: On, Off, Intermediate, Bad
1
Range: On, Off, Intermediate, Bad
2
↓
Range: On, Off, Intermediate, Bad
5
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off, VOff, VOn, IOn, IOff
↓
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off
1
Range: On, Off
2
↓
Range: On, Off
6 ACTUAL VALUES
6.2.5 CONTACT OUTPUTS
6.2.6 VIRTUAL OUTPUTS
GE Multilin