GE C70 Instruction Manual page 214

5.2 PRODUCT SETUP
Select the
DIRECT I/O DATA RATE
over direct inputs and outputs must be set to the same data rate. UR-series IEDs equipped with dual-channel communica-
tions cards apply the same data rate to both channels. Delivery time for direct input and output messages is approximately
0.2 of a power system cycle at 128 kbps and 0.4 of a power system cycle at 64 kbps, per each 'bridge'.
Table 5–12: DIRECT INPUT AND OUTPUT DATA RATES
MODULE
74
7L
7M
7P
7T
7W
7V
2A
2B
5
2G
2H
2I
2J
76
77
75
7E
7F
7G
7Q
7R
7S
The G.703 modules are fixed at 64 kbps. The
NOTE
5-90
to match the data capabilities of the communications channel. All IEDs communicating
CHANNEL SUPPORTED DATA RATES
Channel 1 64 kbps
Channel 2 64 kbps
Channel 1 64 kbps, 128 kbps
Channel 2 64 kbps, 128 kbps
Channel 1 64 kbps, 128 kbps
Channel 2 64 kbps, 128 kbps
Channel 1 64 kbps, 128 kbps
Channel 2 64 kbps, 128 kbps
Channel 1 64 kbps, 128 kbps
Channel 1 64 kbps, 128 kbps
Channel 2 64 kbps, 128 kbps
Channel 1 64 kbps, 128 kbps
Channel 2 64 kbps, 128 kbps
Channel 1 64 kbps
Channel 1 64 kbps
Channel 2 64 kbps
Channel 1 128 kbps
Channel 1 128 kbps
Channel 1 64 kbps, 128 kbps
Channel 2 64 kbps, 128 kbps
Channel 1 64 kbps, 128 kbps
Channel 2 64 kbps, 128 kbps
Channel 1 64 kbps
Channel 1 64 kbps
Channel 2 64 kbps
Channel 1 64 kbps
Channel 2 64 kbps
Channel 1 64 kbps
Channel 2 64 kbps
Channel 1 64 kbps
Channel 2 64 kbps
Channel 1 64 kbps
Channel 2 64 kbps
Channel 1 64 kbps
Channel 2 64 kbps
Channel 1 64 kbps
Channel 1 64 kbps
Channel 2 64 kbps
C70 Capacitor Bank Protection and Control System
setting is not applicable to these modules.
DIRECT I/O DATA RATE
5 SETTINGS
GE Multilin