6 ACTUAL VALUES
Table 6–2: FLEXELEMENT BASE UNITS (Sheet 2 of 2)
POWER FACTOR
RTDs
SOURCE CURRENT
SOURCE POWER
SOURCE THD & HARMONICS
SOURCE VOLTAGE
PATH: ACTUAL VALUES
METERING
IEC 61850
GOOSE ANALOGS
MESSAGE
MESSAGE
MESSAGE
The C70 Capacitor Bank Protection and Control System is provided with optional IEC 61850 communica-
tions capability. This feature is specified as a software option at the time of ordering. See the Order Codes
section of chapter 2 for details.
The IEC 61850 GGIO3 analog input data points are displayed in this menu. The GGIO3 analog data values are received
via IEC 61850 GOOSE messages sent from other devices.
PATH: ACTUAL VALUES
METERING
DCMA INPUT xx
Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
PATH: ACTUAL VALUES
METERING
RTD INPUT xx
Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
GE Multilin
PF
= 1.00
BASE
BASE = 100°C
I
= maximum nominal primary RMS value of the +IN and –IN inputs
BASE
P
= maximum value of V
BASE
BASE
BASE = 1%
V
= maximum nominal primary RMS value of the +IN and –IN inputs
BASE
IEC 61850 GOOSE ANALOGS
ANALOG INPUT
1
0.000
ANALOG INPUT
2
0.000
ANALOG INPUT
3
0.000
↓
ANALOG INPUT 32
0.000
TRANSDUCER I/O DCMA INPUTS
DCMA INPUT xx
0.000 mA
TRANSDUCER I/O RTD INPUTS
RTD INPUT xx
-50 °C
C70 Capacitor Bank Protection and Control System
× I
for the +IN and –IN inputs
BASE
6.3.7 IEC 61580 GOOSE ANALOG VALUES
6.3.8 TRANSDUCER INPUTS/OUTPUTS
DCMA INPUT xx
RTD INPUT xx
6.3 METERING
6
6-21