User Interfaces; Phone User Interface; Web User Interface - Yealink SIP-T40P User Manual

LED Status
Solid green (for local BLA
phone)
Solid red (for monitoring BLA
phone)
Slow-flashing green (for local
BLA phone)
Slow-flashing red (for
monitoring BLA phone)
The above introduces the default LED status. The statuses of the power indicator LED and BLF key
Note
LED are configurable via web user interface. You can also customize the BLF key LED status and
BLF key behavior. For more information, contact your system administrator.

User Interfaces

Two ways to customize configurations of your SIP-T40P IP phone:
The user interface on the IP phone.

The user interface in a web browser on your PC.

The hardware components keypad and LCD screen constitute the phone user interface, which
allows the user to execute all call operation tasks and basic configuration changes directly on
the phone. In addition, you can use the web user interface to access all configuration settings. In
many cases, either the phone user interface and/or the web user interface interchangeably.
However, in some cases, it is only possible to use one or the other interface to operate the
phone and change settings.

Phone User Interface

You can customize your phone by pressing the Menu soft key to access the phone user
interface. The Advanced Settings option is only accessible to the administrator, and the default
administrator password is "admin" (case-sensitive). For more information on customizing your
phone with the available options from the phone user interface, refer to
Phone on page 23.
For a better understanding of the menu structure, please refer to
Note
on page 173.

Web User Interface

In addition to the phone user interface, you can also customize your phone via web user
Description
The bridged line is in conversation.
The bridged line is dialing.
The bridged line is seized.
The bridged line conversation is placed on hold.
Overview
Customizing Your
Appendix B – Menu Structure
7