Conference; Local Conference - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
To configure call waiting via phone user interface:
Press Menu->Features->Call Waiting.
1.
Press
2.
Press
3.
(Optional.) Enter the call waiting on code or off code respectively in the On Code or Off
4.
Code field.
If on code or off code is configured, the IP phone will send the corresponding code to
activate or deactivate call waiting on the server. It is not available on all servers.
Press the Save soft key to accept the change or the Back soft key to cancel.
5.
Call waiting is configurable via web user interface at the path Features->General Information.
If on code or off code is not configured, the call waiting may not take effect. It depends on your
Note
server. Contact your server administrator for more information.

Conference

You can create a conference with other two parties using the phone's local conference. You can
create a conference between an active call and a call on hold by pressing the Conf soft key. The
SIP-T40P IP phone also supports network conference.
Network conference is not available on all servers. For more information, contact your system
Note
administrator.

Local Conference

The SIP-T40P IP phone supports up to 3 parties (including yourself) in a conference call. This is
the default method of conference called Local Conference.
To set up a local conference call, make sure local conference feature is enabled. For more
Note
information, contact your system administrator.
To set up a local conference call:
Place a call to the first party.
1.
106
or , or the Switch soft key to select Enabled from the Call Waiting field.
or , or the Switch soft key to select Enabled from the Play Tone field.