Semi-Attended Transfer - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone



Semi-attended Transfer

Before performing a semi-attended transfer (except you use dial number method), make sure
that the transfer mode on DSS key is configured as New Call or Attended Transfer. For more
information on how to configure it, refer to
123.
To perform a semi-attended transfer:
Press the Tran soft key during a call.
1.
Do one of the following:
2.
- Enter the number you want to transfer to.
Press
- Press the Dir soft key, and then select Local Directory. Select the desired group and
search for the contact (Directory should be configured in advance. Refer to
on page
Press
- Press the Dir soft key, and then select History. Select the desired list and then press
or
Directory
Press
- Press the Dir soft key, and then select Remote Phone Book. Select the desired group
and search for the contact (Directory should be configured in advance. Refer to
Directory
Press
If Allow Trans Exist Call (refer to
-
can select the NewCall and repeat steps mentioned above to complete transfer.
Press the Tran soft key to complete the transfer when receiving ringback.
3.
If you are using a handset, the transfer can be completed by hanging up the handset.
104
Press , or the Send soft key to complete the transfer.
Press the Dir soft key, and then select History. Select the desired list and then
press or to select the entry (Directory should be configured in
advance. Refer to Directory
Press , or the Send soft key to complete the transfer.
Press the Dir soft key, and then select Remote Phone Book. Select the desired
group and search for the contact (Directory should be configured in advance.
Refer to Directory on page
information).
Press , or the Send soft key to complete the transfer.
or to dial out.
37 for more information).
, or the Send soft key to dial out.
to select the entry (Directory should be configured in advance. Refer to
on page 37 for more information).
, or the Send soft key to dial out.
on page 37 and Remote Phone Book
, or the Send soft key to dial out.
on page 37 for more information).
37 and Remote Phone Book
Configuring Transfer Mode on DSS Key
on page 49
Allow Trans Exist Call on page 101) is enabled, you
on page 49 for more
on page
Directory
for more information).