Headset Use - Yealink SIP-T40P User Manual

Click Upload to upload the file.
4.
Delete item will appear after you upload a
Note
custom logo.
The logo file format must be *.dob, contact your system administrator for more information.
Logo customization is configurable via web user interface only.

Headset Use

If you want to use a headset, physically connect your headset and activate the headset mode for
use. For more information on physically connecting a headset, refer to
page 13.
To use headset, make sure the headset mode is enabled. Contact your system administrator for
Note
more information.
Headset Mode Activation/Deactivation
To activate the headset mode:
Press
1.
The headset icon
Press the line key or the Answer soft key to answer an incoming call. The call will be
connected to your headset automatically.
Enter the desired number and then press the Send soft key, the phone will then place a call
using the headset automatically. For more information on using the headset to place a call,
refer to Placing Calls
To deactivate the headset mode:
Press
1.
The headset icon
Headset Prior
You can use headset in priority when headset prior feature is enabled. This feature is especially
useful for permanent or full-time headset users.
on the phone.
appears on the idle screen.
on page 78.
again on the phone.
disappears from the idle screen.
custom logo, you can click
Customizing Your Phone
Delete to delete the
Phone Installation on
55