Yealink SIP-T40P User Manual page 115

Press ,
Press the Dir soft key, and then select History. Select the desired list and then press
-
or to select the entry (Directory should be configured in advance. Refer to
Directory on page
Press ,
- Press the Dir soft key, and then select Remote Phone Book. Select the desired group
and search for the contact (Directory should be configured in advance. Refer to
Directory on page
Press ,
You can also perform a blind transfer to another existing call when there are multiple calls.
Before performing a blind transfer to another existing call, make sure that the Allow Trans Exist
Call is enabled. For more information, refer to
To perform a blind transfer during multiple calls:
Press the Tran soft key during a call.
1.
You can do one of the following:
2.
Press or
-
Press ,
Select NewCall, you can do one of the following:
-
Enter the number you want to transfer the call to.

Press the Tran soft key to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the
handset.
Press the Dir soft key, and then select Local Directory. Select the desired group

and search for the contact (Directory should be configured in advance. Refer to
Directory
or the Send soft key to complete the transfer.
37 for more information).
or the Send soft key to complete the transfer.
37 and Remote Phone Book
or the Send soft key to complete the transfer.
Allow Trans Exist Call
to select the desired hold call you want to transfer the call to.
or the Select soft key.
on page 37 for more information).
Basic Call Features
on page 49 for more information).
.
on page 101
103