Yealink SIP-T40P User Manual page 112

User Guide for the SIP-T40P IP Phone
Call forward is configurable via web user interface at the path Features->Forward&DND.
Note You can also enter the SIP URI or IP address in the Forward to field. For more information on
using the SIP URI or IP address, refer to
Call forward is local to the phone, and may be overridden by the server settings. Call forward on
code or off code may be different between servers. For more information, contact your system
administrator.
To configure the forward authorized numbers via web user interface:
Click on Features->Forward&DND.
1.
Select Enabled from the pull-down list of Forward Emergency.
2.
Enter the numbers in the Forward Authorized Numbers field.
3.
For multiple numbers, enter a comma between every two numbers.
Click Confirm to accept the change.
4.
When call forward is activated on the phone, the phone cannot forward incoming calls from the
numbers specified in the Forward Authorized Numbers field.
Note Forward authorized number is configurable via web user interface only.
To deactivate call forward in phone mode:
Press Menu->Features->Call Forward.
1.
Press
2.
Press
3.
Press the Save soft key to accept the change.
4.
100
Placing Calls
or to select the desired forwarding type and then press the Enter soft key.
or , or the Switch soft key to select Disabled to deactivate the call forward.
on page 78.