Yealink SIP-T40P User Manual page 137

Enter the desired pickup code in the Directed Call Pickup Code field.
3.
Click Confirm to accept the change.
4.
Configuring Transfer Mode on DSS Key
When there is an active call on the IP phone, you can handle the active call differently
depending on the configuration of transfer mode via Dsskey with the BLF key.
To configure the transfer mode on DSS key via web user interface:
Click on Features->Transfer.
1.
Select the desired transfer mode from the pull-down list of Transfer Mode via Dsskey.
2.
If you select Blind Transfer, press the BLF key to blind transfer the call to the

monitored user.
If you select Attended Transfer, press the BLF key to dial out the monitored phone

number and then perform an attended or a semi-attended transfer.
If you select New Call, press the BLF key to place a new call to the monitored user.

The original call is placed on hold.
Advanced Phone Features
125