Live Dialpad; Hotline - Yealink SIP-T40P User Manual

Live Dialpad

You can enable live dialpad feature on the SIP-T40P IP phone, which enables the IP phone to
automatically dial out a phone number without pressing the send key. You can also configure a
delay, and then the phone will dial out the phone number automatically after the designated
period of time.
To enable live dialpad via web user interface:
Click on Settings->Preference.
1.
Select Enabled from the pull-down list of Live Dialpad.
2.
Enter the desired delay time in the Inter Digit Time(1~14s) field.
3.
The default delay time is 4 seconds.
Click Confirm to accept the change.
4.
Live dialpad is configurable via web user interface only.
Note

Hotline

You can dial a hotline number immediately upon lifting the handset, pressing the Speakerphone
key or the line key. You can also configure a delay, and then the phone will dial out the hotline
number automatically after the designated period of time.
To configure the hot line number via phone user interface:
Press Menu->Features->Hot Line.
1.
Enter the desired number in the Hotline Number field.
2.
Customizing Your Phone
75