Auto Redial - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
The icon
the default account.
Auto answer is configurable via web user interface at the path Account->Basic.
Auto answer only takes effect when there is no other call in progress on the phone. If there is a
Note
call in progress, the second incoming call cannot be automatically answered after ending the
current call by default. If you want to make the phone automatically answer the incoming call
after ending all calls, contact your system administrator for more information.

Auto Redial

You can enable auto redial to automatically redial a phone number when the called party is busy.
You can also configure the number of auto redial attempts and the time to wait between redial
attempts.
To configure auto redial via phone user interface:
Press Menu->Features->Auto Redial.
1.
Press
2.
Enter the desired time (in seconds) in the Redial Interval field.
3.
The default value is "10".
Enter the desired number of redial attempts in the Redial Times field.
4.
The default value is "10".
Press the Save soft key to accept the change or the Back soft key to cancel.
5.
Auto redial is configurable via web user interface at the path Features->General Information.
84
appears on the LCD screen only when the auto answer feature is enabled for
or , or the Switch soft key to select Enabled from the Auto Redial field.