Yealink SIP-T40P User Manual page 139

Press the BLF key of the monitored user again or the Tran soft key to complete the transfer
2.
when receiving ringback.
To perform an attended transfer:
Press the BLF key of the monitored user which you want to transfer this call to. The phone
1.
will dial the number of the monitored user.
Press the BLF key of the monitored user again or the Tran soft key to complete the transfer
2.
after the monitored user answers the call.
When the transfer mode on DSS key is set to New Call and there is already an active call on the
IP phone, you can do the following:
To perform a new call:
Press the BLF key of the monitored user you want to call.
1.
The phone will dial the number of the monitored user. The original call is placed on hold.
Picking up an Incoming Call of the Monitored User
When the monitored user receives an incoming call, the BLF key indicator of the monitored user
will flash red. You can use the BLF key to pick up an incoming call of the monitored user. If you
enable visual alert feature on the phone, you can pick up the incoming call using the DPickup
soft key. Before picking up an incoming call, ensure that the directed call pickup code has been
configured in advance.
To pick up an incoming call using the BLF key or the DPickup soft key:
Press the BLF key or the DPickup soft key.
1.
The incoming call of the monitored user is answered on the IP phone.
If the directed call pickup code is not configured, the phone will place a call to the monitored
Note
user instead of picking up an incoming call of the monitored user when you press the BLF key
or the DPickup soft key.
Parking a Call/Retrieving a Parked Call to the Monitored User
You can press the desired BLF key to park a call or retrieve a parked call directly in FAC mode. It
should be pre-configured by your system administrator.
To park a call in FAC mode:
During a call, press the Park soft key (You may need to press the More soft key to see the
1.
Park soft key).
Press the desired BLF key to park the call to the monitored user.
2.
To retrieve a parked call in FAC mode:
Press the Retrieve soft key on the dialing screen.
1.
Advanced Phone Features
127