Anonymous Call Rejection - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
Press
3.
field.
(Optional.) Press
4.
Send Anony Code field.
The phone will send the configured on code or off code depending on your selection when
you enable or disable anonymous call feature on the phone.
(Optional.) Enter the anonymous call on code in the On Code field.
5.
(Optional.) Enter the anonymous call off code in the Off Code field.
6.
Press the Save soft key to accept the change or the Back soft key to cancel.
7.
Anonymous call is configurable via web user interface at the path Account->Basic.
To place an anonymous call:
Using the specific line on the phone to place a call to phone B.
1.
The LCD screen of phone B prompts an incoming call from anonymity.

Anonymous Call Rejection

You can use anonymous call rejection to reject incoming calls from anonymous callers.
Anonymous call rejection automatically rejects incoming calls from callers who deliberately
block their identities and numbers from being displayed. Anonymous call rejection is
configurable on a per-line basis. You can also configure the phone to send anonymous call
rejection on/off code to the server to activate/deactivate anonymous call rejection on the server
side.
To configure anonymous call rejection via phone user interface:
Press Menu->Features->Anonymous Call.
1.
Press
2.
Press
3.
118
or , or the Switch soft key to select Enabled from the Local Anonymous
or , or the Switch soft key to select the desired value from the
or , or the Switch soft key to select the desired line from the Line ID field.
or to scroll to the Anony Rejection field.