Yealink SIP-T40P User Manual page 125

If Enabled is selected, the Park soft key will display on the LCD screen during a call, and
the Retrieve soft key will display on the dialing screen.
(Optional.) Enter the call park number in the Call Park Code field.
4.
It is configured for the Park soft key. This call park code will also apply to the call park key.
(Optional.) Enter the park retrieve code in the Park Retrieve Code field.
5.
It is configured for the Retrieve soft key. This park retrieve code will also apply to the
retrieve park key.
Click Confirm to accept the change.
6.
If the Park or Retrieve soft key doesn't appear on the LCD screen, please select Disabled from
Note
the pull-down list of Custom Softkey via web user interface at path Settings->Softkey
Layout.
To park a call in Transfer mode:
During a call, press the Park soft key (You may need to press the More soft key to see the
1.
Park soft key) or the call park key (if configured).
If the call park code is not configured, you need to enter the call park code (e.g., *01).
-
Press
parking lot.
If the call park code is configured, the call will be directly transferred to the shared
-
parking lot.
Note For some servers, the system will return a specific park retrieve number (park retrieve code)
from which the call can be retrieved after parking successfully.
, or the Park soft key. The call will be transferred to the shared
Basic Call Features
113