Yealink SIP-T40P User Manual page 91

Enter the desired number using the keypad.
Press
With the handset on-hook, enter the desired number using the keypad.
-
Press
To place a call using the headset:
Do one of the following:
With the optional headset connected, press
-
Press the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press
With the optional headset connected, press
-
Enter the desired number using the keypad.
Press
To permanently use the headset mode, refer to
Note
The SIP-T40P IP phone can handle multiple calls at a time. However, only one active call (the call
that has audio associated with it) can be in progress at any time, other calls are placed on hold.
The SIP-T40P IP phone can handle a maximum of 50 calls at one time.
To place multiple calls:
You can have more than one call on your SIP-T40P IP phone. To place a new call during an
active call, do one of the following:
Press the line key. The active call is placed on hold.
-
Enter the desired number using the keypad.
Press
Press the Hold soft key to place the original call on hold.
-
Press the NewCall soft key.
Enter the desired number using the keypad.
Press
You can press
retrieve the desired call.
If multiple accounts are registered on the phone, you can first press the desired line key on the
Note
idle screen or press the Line soft key on the dialing screen, and then you can use the selected
account to place a call.
, , or the Send soft key.
, , , or the Send soft key.
, , or the Send soft key.
, , or the Send soft key.
, , or the Send soft key.
, , or the Send soft key.
or to switch between calls, and then press the Resume soft key to
to activate the headset mode.
to activate the headset mode.
Headset Prior on page 55.
Basic Call Features
79