Call Completion - Yealink SIP-T40P User Manual

To use auto redial:
When the called party is busy, the LCD screen prompts the following:
Press the OK soft key to activate auto redial. The following prompt will appear on the LCD
1.
screen of the phone:
Wait for the designated period of time or press the OK soft key to redial the phone
2.
number.
The phone will retry as many times as configured until the called party is idle.

Call Completion

You can use call completion to notify the caller who failed to reach a desired party when the
party becomes available to receive a call.
To configure call completion via phone user interface:
Press Menu->Features->Call Completion.
1.
Press
2.
field.
Press the Save soft key to accept the change or the Back soft key to cancel.
3.
Call completion is configurable via web user interface at the path Features->General
Information.
or , or the Switch soft key to select Enabled from the Call Completion
Basic Call Features
85