Muting While Dialing; Call Hold/Resume - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone

Muting While Dialing

To mute the microphone while dialing:
Press
1.
The call is muted automatically when setting up successfully.
To un-mute the microphone while dialing:
Press
1.
Note
You can also mute the microphone when the IP phone is ringing.

Call Hold/Resume

You can place an active call on hold. Only one active call can be in progress at any time. Other
calls can be made and received while placing the original call on hold. When you place a call on
hold, your IP PBX may play music to the other party while waiting.
To place a call on hold:
Press the Hold soft key during a call.
1.
The line key LED flashes green. The LCD screen indicates that the call is on hold.
Note The phone will beep softly every 30 seconds to remind you that you still have a call on hold. The
phone ignores engaged audio device (handset or headset) and switches to Speakerphone to play
the hold tone by default.
To resume a held call:
Press the Resume soft key.
1.
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
Press
-
retrieve the desired call.
Press the corresponding line key to retrieve the call.
-
88
on the pre-dialing, dialing or calling screen.
again on the pre-dialing, dialing or calling screen.
or to switch between the calls, and then press the Resume soft key to