Yealink SIP-T40P User Manual page 107

In the Forward block, mark the desired radio box in the Mode field.
2.
Click Confirm to accept the change.
3.
Call forward mode is configurable via web user interface only.
Note
To activate call forward in phone mode:
Press Menu->Features->Call Forward.
1.
Press
2.
Depending on your selection:
3.
If you select Always Forward:
a)
1)
2)
3)
If you select Busy Forward:
b)
or to select the desired forwarding type, and then press the Enter soft key.
Press or , or the Switch soft key to select Enabled from the Always
Forward field.
Enter the destination number you want to forward all incoming calls to in the
Forward to field.
(Optional.) Enter the always forward on code or off code respectively in the On
Code or Off Code field.
Basic Call Features
95