User Interfaces; Phone User Interface - Yealink T5 Series User Manual

LED Status
Solid green (Local BLA Phone)
Solid red (Monitoring BLA
Phone)
Slow-flashing green (Local BLA
Phone)
Slow-flashing red (Monitoring
BLA Phone)
The above is the default LED status, since the status of the power LED indicators may be
Note
configured by your system administrator. For more information, please contact your system
administrator.

User Interfaces

There are two ways to configure your IP phone:
Via phone user interface

Via web user interface

The phone user interface, being made up of keypad and LCD screen, allows users to perform all
call operations and change basic configuration settings directly on the phone. But if you want to
access all configuration settings, you should use web user interface instead. In most cases, it is
possible to configure your IP phone via both phone user interface and web user interface. While
in some particular cases, only via phone user interface or via web user interface is available for
you to operate or configure your IP phone. This guide mainly takes phone user interface as an
example.

Phone User Interface

Before you use the phone, you need to understand the phone screen layout, how to navigate
menus and fields, and how to enter and edit data.
Idle Screen
After starting up successfully, the phone enters Idle screen automatically. From the Idle screen,
you can access the Menu screen, History screen, Directory screen and Line Key screen. These
screens are described in the following chapters:
Menu Screen

History Screen

Directory Screen

Description
The bridged line is is busy or is in a call..
The bridged line is dialing.
The bridged line is seized.
The call on bridged line is placed on hold.
Overview
13