Yealink SIP-T40P User Manual page 103

To activate DND in custom mode:
Press the DND soft key when the phone is idle.
1.
The LCD screen displays a list of accounts registered on the phone.
You can activate it for a specific account:
2.
Press or
1)
Press or
2)
field.
(Optional.) Enter the DND on code or off code respectively in the On Code or Off
3)
Code field.
If the on code or off code is configured, the IP phone will send the corresponding code
to activate or deactivate DND on the server. It is not available on all servers.
You can also activate DND for all accounts:
Do the following:
1)
Press the All On soft key if DND on code and off code are not needed on your
-
server.
After DND was activated for a specific account on the step 2, press
-
to highlight the DND Status field.
Press the All Lines soft key. The LCD screen prompts "Copy to all lines?".
Press the OK soft key to accept the change or the Cancel soft key to cancel.
Press the Save soft key to accept the change.
3.
to select the desired account and then press the Enter soft key.
, or the Switch soft key to select Enabled from the DND Status
Basic Call Features
or
91