Yealink SIP-T40P User Manual page 74

User Guide for the SIP-T40P IP Phone
Usage: Press the Conference key during an active call to set up a conference with the number
specified in the Value field.
Note
If the Value field is left blank, the Conference key performs the same as the Conf soft key during
a call.
Forward
You can use this key feature to forward an incoming call to someone else. For more information,
refer to Call Forward
Dependencies:
Usage: Press the Forward key to forward an incoming call to the number specified in the
Value field.
Note If the Value field is left blank, the Forward key performs the same as the
receiving an incoming call.
Transfer
When there is an active call on the phone, you can use this key feature to handle the call
differently depending on the transfer mode assigned to the DSS key.
Dependencies:
Usage:
When the transfer mode on DSS key is Blind Transfer, press the Transfer key to complete

the blind transfer to the number specified in the Value field.
When the transfer mode on DSS key is Attended Transfer, press the Transfer key to dial

out the number specified in the Value field, and then perform the attended or
semi-attended transfer.
62
Label (key label displayed on the LCD screen)
Value (the number you want to add to the conference)
on page 93.
Type (Key Event)
Key Type (FWD)
Label (key label displayed on the LCD screen)
Value (the number you want to forward to)
Type (Key Event)
Key Type (Tran)
Label (key label displayed on the LCD screen)
Value (the number you want to transfer to)
soft key when
FWD