Configuring A Record Key - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
Two ways of call recording:
Record: The phone sends SIP INFO message containing a specific header "Record: on/off"

to trigger a recording.
URL Record: The phone sends HTTP URL request to trigger a recording. Contact your

system administrator for the predefined URL.
Server recording is not available on all servers. Contact your system administrator for more
Note
information.
The Record and URL Record keys control the recording function, and are available:
During an active call

When calls are on hold or mute

During a blind or attended transfer

During a conference call

When the phone prompts you to answer an incoming call

The Record and URL Record keys are not available when:
There are no connected calls on your phone

You place a new call


Configuring a Record Key

To configure a record key via phone user interface:
Press Menu->Features->DSS Keys.
1.
Select the desired DSS key.
2.
Press
3.
Press
4.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
5.
Press the Save soft key to accept the change or the Back soft key to cancel.
6.
Record key is configurable via web user interface at the path Dsskey->Line Key.
130
or , or the Switch soft key to select Key Event from the Type field.
or , or the Switch soft key to select Record from the Key Type field.