User Interfaces; Phone User Interface; Web User Interface - Yealink T41P User Manual

User Guide for the SIP-T41P IP Phone

User Interfaces

There are two ways to customize specific configurations on your SIP-T41P IP phone:
Using the user interface on the IP phone.
Using the user interface in an internet browser window from your PC.
The hardware components keypad and LCD screen constitute the phone user
interface, which allows the user to execute all call operation tasks and basic
configuration changes directly on the phone. In addition, you can use the web user
interface to access all configuration settings. In many instances, it is possible to use both
the phone user interface and the web user interface to operate the phone and
change settings. However, in some instances, it is only possible to use the phone user
interface or the web user interface.

Phone User Interface

You can customize your phone by pressing the Menu soft key to access the phone user
interface. The Advanced Settings option is only accessible to an administrator, and the
default administrator password is admin (case-sensitive). For more information on
customizing your phone using the available options from the phone user interface, refer
to Customizing Your Phone

Web User Interface

In addition to the phone user interface, you can also customize your phone via web
user interface. In order to access the web user interface, you need to know the IP
address of your new phone. To obtain the IP address, press the OK key on the phone.
Enter the IP address (e.g., http://192.168.0.10 or 192.168.0.10) in the address bar of web
browser on your PC. The default administrator user name and password are both admin
(case-sensitive).
The options you can use to customize the IP phone via phone user interface and/or via
web user interface are listed in the following table:
Options
Status
--IPv4
--MAC
--Firmware
--Network
--Phone
--Accounts
Basic Call Features
6
on page 17.
Phone User Interface
√
Web User Interface
√
√