Searching For Contacts - Yealink SIP-T40P User Manual

The IP phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If Local Directory is removed from the
Menu->Directory->Local Directory to enter the local directory.
Select the desired contact group and then press the Enter soft key.
2.
If the contact is not in any group, select All Contacts and then press the Enter soft key.
Press
3.
Do one of the following:
4.
- If only one number of the contact is stored in the local directory, press the Send soft
key to dial out the number.
- If multiple numbers of the contact are stored in the local directory, press the Send soft
key to display a list of numbers.
Press
Press the Send soft key to dial out the number.

Searching for Contacts

To search for a contact in the local directory:
Press the Dir soft key.
1.
The IP phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If Local Directory is removed from the
Menu->Directory->Local Directory to enter the local directory.
Press the Search soft key.
2.
or to highlight the desired contact.
or to highlight the desired number.
(refer to Directory
directory
(refer to Directory
directory
Customizing Your Phone
on page 37), press
on page 37), press
45