Yealink SIP-T40P User Manual page 123

It is configured for the Retrieve soft key. This park retrieve code will also apply to the call
park key.
Click Confirm to accept the change.
6.
Note If the Park or Retrieve soft key doesn't appear on the LCD screen, please select Disabled from
the pull-down list of Custom Softkey via web user interface at path Settings->Softkey
Layout.
To park a call in FAC mode:
During a call, press the Park soft key (You may need to press the More soft key to see the
1.
Park soft key) or the call park key (if configured).
If the call park code is not configured, you need to enter the call park code (e.g., *68).
-
Press
If the call park code is configured, the phone will dial the configured call park code
-
shown as below:
, or the Park soft key.
Basic Call Features
111