Yealink SIP-T40P User Manual page 164

User Guide for the SIP-T40P IP Phone
Hybrid Key System scenario. In a SCA Hybrid Key System scenario, the status of the line key LED
which associates with a shared line will change. For more information on line key LED indicators,
refer to LED Instructions
You can do the following using the IP phone in a SCA Hybrid Key System scenario:
Placing calls

Answering calls

Placing a call on hold

Retrieving a held call

Barging in an active call

Call Pull

Placing Calls
You can have one call or multiple calls on the shared line.
To place a call on the shared line:
Do one of following:
- Enter the desired number using the keypad when the phone is idle. Press
the Send soft key.
The phone will dial the entered number using the first line key.
- Press the line key when the phone is idle to enter the dialing screen.
Enter the desired number using the keypad and then press
key.
The phone will dial the entered number using the selected line key.
To place multiple calls on the shared line:
You can have more than one call on the shared line. To place a new call when there is an active
call on the line key 1 of phone A, do one of the following on phone A:
Press the Hold soft key. The original call is placed on hold.
-
Press the NewCall soft key to enter the dialing screen.
Enter the desired number using the keypad.
Press
Phone A will dial the entered number using the line key 2 automatically.
Press the line key. The original call is placed on hold.
-
Enter the desired number using the keypad.
Press
Phone A will dial the entered number using the selected line key.
152
on page 5.
, , or the Send soft key.
, , or the Send soft key.
, , or
, , or the Send soft