User Interfaces - Yealink SIP-T46S User Manual

Line key LED (associated with a bridged line)
The local BLA phone indicates the phone is involved in a BLA call, while the monitoring BLA
phone indicates the phone is not involved in the BLA call.
LED Status
Off
Fast-flashing green
Solid green (for local BLA
phone)
Solid red (for monitoring BLA
phone)
Slow-flashing green (for local
BLA phone)
Slow-flashing red (for
monitoring BLA phone)
The above introduces the default LED status. The statuses of the power indicator LED and BLF key
Note
LED are configurable via web user interface. You can also customize the BLF key LED status and
BLF key behavior. For more information, contact your system administrator.

User Interfaces

Two ways to customize configurations of your SIP-T46S IP phone:
The user interface on the IP phone.

The user interface in a web browser on your PC.

The hardware components keypad and LCD screen constitute the phone user interface, which
allows the user to execute all call operation tasks and basic configuration changes directly on
the phone. In addition, you can use the web user interface to access all configuration settings. In
many cases, it is possible to use either the phone user interface and/or the web user interface
interchangeably. However, in some cases, it is only possible to use one or the other interface to
operate the phone and change settings.
Description
The bridged line is idle.
The bridged line receives an incoming call.
The bridged line is in conversation.
The bridged line is dialing.
The bridged line is seized.
The bridged line conversation is placed on hold.
Overview
11