IFM Electronic CR0403 Programming Manual page 17

ifm Programming Manual ecomatmobile
System description
>
Input group I2 (IN8...IN11)
These inputs are a group of multifunction channels.
These inputs can be used as follows (each input separately configurable):
• binary input plus switching (BL) for positive sensor signal (with/without diagnosis)
Possible operating modes inputs/outputs
→ chapter
Sensors with diagnostic capabilities to NAMUR can be evaluated.
► Configuration of each input is made via the application program:
INPUT
• FB (→ page 173) > input MODE
BasicController (CR0403) Runtime System V03.02
(→ page 207)
17
2015-04-01
Hardware description
14570